Single-phase Static Energy Meter is used to measure 50Hz or 60Hz active energy consumption from
single phase AC electricity net.
The meter adopts LSI (Large-scale Integration) and SMT manufacturing technique,the key components and
part all adopt long life type.
With the features of good reliability, small volume, light weight, specious appearance, etc., the meter is widely
used in office buildings, shopping malls, residences, airports and metro,etc.
FUNCTIONS AND FEATURES
♦Front board three fixed installation, the casing is made of high definition material such as ABS anti-flaming
material, PC etc., and the terminal is made of bakelite which is moisture-resistant, fire-retardant, high
temperature molded overall.
♦5+1 or 6+1 digits cyclometer display, (Entirely closed register, HF magnet immune register, unidirectional step
motor type impulse register optional) . May select LED or LCD display(Standard LCD, or backlight LCD, can
select a maintenance-free lithium battery, used to display when power failure.)
♦Standard configuration one port of pulse output passive (polarity), may select increase a distant port of pulse
output passive(nonpolarity),complying with standard IEC62053-21.
♦LED instructions power supply state,signal of energy impulse and current reverse.
♦Single direction measures single phase two wire active power consumption. May select to measure single
phase three wire. It is nothing with direction of the flow of load current,complying with standard IEC62053-21, IEC62052-11.
♦Adopts high reliable and long-life electric components,hioverload, do not need to calibrate for long-term
♦Direct connect operation,there are two types wiring you may select.
♦Extended or short terminal cover.